SH-4 Tower: 3 Way 4 Speaker System Ported Design
Specification:

· 5.5” x 1 Carbon Fibre woven cone driver
· 5.5” x 1 Glass Fibre Kevlar cone driver
· 25mm x 1 Silk Dome Diaphram Tweeter with Neo D magnet   with rear phase, dampening plugs and Ferro fluid cooled   voice coil.
· 6” x 1- 4 layered voice coil with deep pole magnet structure   stiffed non press paper cone
· Frequency Response- 42 Hz- 20 Khz ± 5 db
· SPL- 89db @ 2.83V ± 3 db 1 w 1 m
· Impedance- 8 ohms
· Recommended Amplifier- 80-100watts/RMS @ 8 ohms
· Maximum Rated Output- 130watts/RMS @ 8 ohms driven   flat
· H x W x D – 36” x 7” x 10.25”


SH-4 Surrounds- Bi-polar Design
Specification:

· 2 Way 3 Speaker System
· 4.5” x 2 Doped paper cone driver with aluminium voice coil
· ¾” x 2 Polyamide coated tweeter with Neo D magnet
· 2 Way simple butterworth crossover design
· Frequency Response- 60 Hz-20 Khz
· SPL- 88db @ 2.83V/w/m ± 3 db
· Impedance- 8 ohms
· Maximum Handling- 130 RMS @ 8 ohms
· H x W x D – 10” x 12” x 6.75”





SH-4 Center Channel- 2 Way 3 Speaker System Dual Ported
Specification:

· 5” x 2 Glass fibre Kevlar cone with kapton voice coil design
· 25mm x 1 Silk Dome Diaphram Tweeter liquid cooled
· 2 Way crossover design
· Frequency Response- 65 Hz-20 Khz
· Impedance- 8 ohms
· H x W x D – 7” x 17.5” x 6.75”







SH-4 Subwoofer- Slot Ported Design
Specification:

· 10” Phenolic coated thick foam surround
· Non pressed stiff paper cone
· 63mm Double Voice Coil Design
· Deep pole structure magnet motor
· Double suspension
· 250 RMS Class ‘D’ Digital power Amp with pure 18 db active   crossover design
· V.Control- 2 precise calibration of frequency
· V.control- 1 volume for gain
· Phase Switch- 0- 180 for matching acoustics of the room   and getting in calibration with other speakers.
· On-off stand by- 5 mins
· H x W x D – 16” x 15.5” x 16”